Stenner 45MPHP10 Fixed Rate Dosing Pump 10 GPD

Stenner 45MPHP10 Dosing Pump

aQuatell Part Number
20101229321

Manufacturer Part Number
45MPHP10


The Stenner 45MPHP10 is a fixed rate dosing pump that outputs 10 gallons per day.  The 45MPHP10 features a 3-roller pumping design that makes this pump self-priming and prevents back flow and siphoning.  This system operates at 120V 60Hz and comes complete with a 20' roll of 1/4" white tubing.

Product Options

This product comes with customizable parts and options. Please select one from each of the drop down menus below:

Sometimes dosing pumps are used outdoors in an unprotected area. If you're planning on using your dosing pump outside in this manner, you'll need to use a Rain Roof
Sometimes dosing pumps are used outdoors in an unprotected area. If you're planning on using your dosing pump outside in this manner, you'll need to use a Rain Roof
USD
$399.00
AS CONFIGURED
switch to Canadian pricing

Resources

Below is a list of downloadable resources for available in .pdf format.

In The Box

Everything that comes with this product.

  • 45MPHP10 dosing pump
  • 3 connecting nuts (1/4")
  • 1/4" ferrules
  • injection check valve
  • weighted suction line strainer
  • 20' roll of white 1/4" suction/discharge tubing
  • 1 x additional pump tube
  • mounting bracket
  • manual

Tech Specs

Everything you need to know about this product:

  • 8" x 5.3" x 6"
  • 100 psi maximum output pressure
  • 125°F (52°C) maximum operating temperature
  • 25 foot (7.6m) maximum vertical lift (based on water)
  • 1/30 horsepower motor, shaded pole, class B
  • continuous duty cycle
  • 120V 60Hz 1.7 amp
  • polycarbonate construction
  • oil impregnated sintered bronze roller bushings

Warranty

Coverage for this product includes the following:

  • 1 year manufacturers warranty

More About the Stenner 45MPHP10 Fixed Rate Dosing Pump 10 GPD

The Stenner 45MPHP10 is a fixed rate dosing pump that outputs 3.0 gallons per day total volume.  All Stenner dosing pumps including the 45MPHP10 features a 3-roller design.  Three spinning rollers massage the tubing and push the liquid through.  This system of three rollers ensures that the prime is never lost, and that siphoning and back flow are prevented.

The Stenner 45MPHP10 is a fixed rate dosing pump.  The amount of chemical being injected is adjusted by changing the concentration of the chemical in the solution being pumped, or by changing the tubing that is used with the pump.

The Stenner 45MPHP10 offers many unique features and advantages that include the following:

  • Will self prime up to 25 and will not lose prime
  • Pump head requires no valves, allows for easy maintenance
  • Is capable of pumping off-gassing solutions
  • Does not lose prime or vapor lock
  • Output volume is not affected by back pressure
  • Easy to change pump tube, no lubrication required
  • Chemicals being pumped are contained fully within tubing and not exposed to pump or air
  • Pump head and pump tubes interchange between models
  • Pump can run dry without damaging any components
  • Cannot be clogged with dirt or debris
  • Different tubing can be used for handling different chemical solutions