Stenner 85MHP40 Classic Series Dosing Pump 40 GPD

Stenner 85MHP40 Dosing Pump

aQuatell Part Number
20101230212

Manufacturer Part Number
85MHP40


The Stenner 85MHP40 is an adjustable rate dosing pump capable of pumping from 2 - 40 gallons per day.  The 85MHP40 features a 3-roller pumping design that makes this pump self-priming and prevents back flow and siphoning.  Adjusting the output of the Stenner 85MHP40 is accomplished by changing the rpm of the pump motor and/or by changing the percentage setting on the feed rate control.  This system is 120V / 60Hz and ships with white 1/4" tubing.

Product Options

This product comes with customizable parts and options. Please select one from each of the drop down menus below:

Sometimes dosing pumps are used outdoors in an unprotected area. If you're planning on using your dosing pump outside in this manner, you'll need to use a Rain Roof
Sometimes dosing pumps are used outdoors in an unprotected area. If you're planning on using your dosing pump outside in this manner, you'll need to use a Rain Roof
USD
$399.00
AS CONFIGURED
switch to Canadian pricing

Resources

Below is a list of downloadable resources for available in .pdf format.

In The Box

Everything that comes with this product.

  • 45MHP2 dosing pump
  • 3 connecting nuts (1/4")
  • 1/4" ferrules
  • injection check valve
  • weighted suction line strainer
  • 20' roll 1/4" white suction/discharge tubing
  • 1 x additional pump tube
  • mounting bracket
  • manual

Tech Specs

Everything you need to know about this product:

  • 11" x 6" x 6"
  • up to 100 psi maximum output pressure
  • 125°F (52°C) maximum operating temperature
  • 25 foot (7.6m) maximum vertical lift (based on water)
  • 1/30 horsepower motor, shaded pole, class B
  • continuous duty cycle
  • 120V 60Hz 1.7 amp
  • polycarbonate construction
  • 1/4" tubing
  • oil impregnated sintered bronze roller bushings

Warranty

Coverage for this product includes the following:

  • 1 year manufacturers warranty

More About the Stenner 85MHP40 Classic Series Dosing Pump 40 GPD

The Stenner 85MHP40 is an adjustable rate dosing pump that is capable of outputting from 2 - 40 gallons per day total volume.  All Stenner dosing pumps including the 85MHP40 features a 3-roller design.  Three spinning rollers massage the tubing and push the liquid through.  This system of three rollers ensures that the prime is never lost, and that siphoning and back flow are prevented.

The Stenner 85MHP40 is a variable rate dosing pump meaning that the total volume of liquid being pumped can be adjusted.  The volume output of the dosing pump depends on three settings - the diameter of the tubing being used with the pump, the rpm setting of the motor, and the percentage setting on the feed rate control.  The Stenner 85MHP40 is built with three detachable components - the pump head, the feed rate control, and the motor.

The Stenner 85MHP40 offers many unique features and advantages that include the following:

  • Will self prime up to 25 and will not lose prime
  • Pump head requires no valves, allows for easy maintenance
  • Is capable of pumping off-gassing solutions
  • Does not lose prime or vapor lock
  • Output volume is not affected by back pressure
  • Easy to change pump tube, no lubrication required
  • Chemicals being pumped are contained fully within tubing and not exposed to pump or air
  • Pump head and pump tubes interchange between models
  • Pump can run dry without damaging any components
  • Cannot be clogged with dirt or debris
  • Outputs are consistent to within 2%
  • Feed rate can be adjusted from 5% - 100% in 5% incriments
  • Different tubing can be used for handling different chemical solutions