Pentek C1 Carbon Impregnated Cellulose Filter

Pentek C1 Filter Cartridge

aQuatell Part Number
300126

Manufacturer Part Number
C1


Pentek C1 is an economically priced 5-micron sediment filter that is impregnated with powdered activated carbon.  It is ideal as a sediment filter where some taste/odor & chlorine reduction is desired.  Pentek C1 is recommended for use on chlorinated water supplies only.

Resources

Below is a list of downloadable resources for available in .pdf format.

In The Box

Everything that comes with this product.

  • 1 X Carbon Cellulose Water Filter

Tech Specs

Everything you need to know about this product:

  • 9 3/4" X 2 1/2"
  • 5 micron nominal rating
  • 4 psi pressure drop at 5 gpm
  • 2,500 gallon chlorine removal capacity at 1 gpm
  • PAC Impregnated Cellulose
  • Cellulose Polyester Reinforcement Backing
  • Buna-N Gaskets
  • 40˚F to 125˚F (4.4˚ C to 51.7˚C) temp rating

Common Accessories

You might want to consider adding the following to your order:

Whole House Water Filter Housing Kit 10" / Blue

Standard Water Filter Housing Kit 10" / Blue

This standard 10" water filter housing for whole homes will accomodate all standard sized water purfication cartridges. The sump on this whole house filter housing is blue. Kit comes complete with mounting hardware and filter wrench.

Whole House Water Filter Housing Kit 10" / Clear

Standard Water Filter Housing Kit 10" / Clear

This standard 10" water filter housing kit for whole homes will accomodate all standard sized water purfication cartridges. The sump on this whole house filter housing is clear. Kit comes complete with mounting hardware and filter wrench.

Pentek EP-10 Carbon Block Filter | 10" Standard

Pentek EP-10 Carbon Block Filter - 10" Standard

Pentek EP-10 carbon block filter combines the chemical absorbing properties of a carbon block filter with the dirt handling of a 5 micron sediment filter. Ideal for filtering chlorine, bad taste/odor from water.

More About the Pentek C1 Carbon Impregnated Cellulose Filter

The Pentek C1 is a value-priced sediment filter that is used for sediment reduction and for removing small amounts of taste/odor and chlorine from the water.  The pleated design of the C1 offers a high surface area making this cartridge a good choice where high flow rates and low pressure drop are required.  The pleated design also gives the Pentek C1 good dirt holding capabilities.  Due to the cellulose construction of this filter it is only recommended for chlorinated water supplies.