Pentek ECP50-20 Sediment Filter 50-Micron - 20" Standard
aQuatell Part Number
300221
Manufacturer Part Number
ECP50-20
Pentek ECP50-20 is a 50-micron sediment filter featuring high flow capacity and low pressure loss at a very competitive price point.
Resources
Below is a list of downloadable resources for available in .pdf format.
In The Box
Everything that comes with this product.
Tech Specs
Everything you need to know about this product:
- 2 5/8" X 20"
- less than 1 psi pressure loss at 10 gpm
- cellolose & polyester construction
- polypropylene core
- vinyl plastisol end caps
- 40˚F to 125˚F (4.4˚ C to 51.7˚C) temp rating
Common Accessories
You might want to consider adding the following to your order:
More About the Pentek ECP50-20 Sediment Filter 50-Micron - 20" Standard
The Pentek ECP50-20 is a 50-micron pleated cellulose/polyester sediment filter that is used for removing sediment from water. The ECP50-20 offers an excellent combination of price and performance. The pleated design maximizes surface area resulting in high flow rates and very low pressure drop. The ECP50-20 also offers very good dirt holding capacity at this price point. The combination of cellulose and polyester gives this filter good rigidity and bacterial resistance versus a cellulose only cartridge.
More about the Pentek ECP50-20 Cartridge:
The Pentek ECP50-20 cartridge is manufactured from a special formulation of resin-impregnated cellulose and polyester fibers. The unique blend of these two materials provides a higher wet strength than regular cellulose cartridges. It also provides high flow rates and dirt- holding capacity, while maintaining extremely low pressure drop. The filter media of the ECP50-20 is pleated around a polypropylene core for added strength and the ends are immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat block in this fashion fuses the components together forming a unified endcap and gasket.
