Pentek NCP-20 Carbon Impregnated Non-Cellulose Filter
aQuatell Part Number
300131
Manufacturer Part Number
NCP-20
Pentek NCP-20 is a non-cellulose 10-micron pleated sediment filter that is impregnated with powdered activated carbon. It is ideal as a sediment filter where some taste/odor & chlorine reduction is desired. The Pentek NCP-20 can be used on chlorinated or non-chlorinated water supplies.
Resources
Below is a list of downloadable resources for available in .pdf format.
In The Box
Everything that comes with this product.
- 1 X Carbon Cellulose Water Filter
Tech Specs
Everything you need to know about this product:
- 20" X 2 1/2"
- 10 micron nominal rating
- 2 psi pressure drop at 8 gpm
- 500 gallon chlorine removal capacity at 2 gpm
- Pleated Carbon-Impregnated Polyester
- Polypropylene Netting & Core
- Vinyl Plastisol End Caps
- 40˚F to 125˚F (4.4˚ C to 51.7˚C) temp rating
Common Accessories
You might want to consider adding the following to your order:
More About the Pentek NCP-20 Carbon Impregnated Non-Cellulose Filter
The Pentek NCP-20 is a non-cellulose sediment filter that is impregnated with powdered activated carbon. It is rated at 10-microns. This Pentek NCP-20 is an ideal cartridge for non-chlorinated water supplies where sediment reduction is the primary purpose of the filter and where taste/odor/chlorine reduction is also desired.
The pleated design of the Pentek NCP-20 gives it a very high surface area which gives this cartridge excellent flow capacity with minimal pressure loss. This filter is most commonly used as a polishing filter for post reverse osmosis applications and for well water purification.
