Pentek S1-20 Pleated Sediment Filter 20 Micron - 20" Standard

Pentek S1-20 Pleated Sediment Filter 20 Micron | 20" Standard

aQuatell Part Number
200035

Manufacturer Part Number
S1-20


Pentek S1-20 pleated cellulose sediment water filter is designed for general water filtration purposes. It is rated at 20 microns and intented for use on chlorinated water supplies. The Pentek S1-20 is used to remove suspended solids from water.

Resources

Below is a list of downloadable resources for available in .pdf format.

In The Box

Everything that comes with this product.

1 X Pleated Cellulose Sediment Filter Cartridge

Tech Specs

Everything you need to know about this product:

  • 20" X 2.5"
  • Resin-Impregnated Cellulose
  • Plastisol End Caps
  • Polypropylene core
  • Polyethylene netting
  • Temperature Rating 40˚F to 145˚F (4.4˚C to 62.8˚C)

Common Accessories

You might want to consider adding the following to your order:

Whole House "Double Duty" Water Filter Housing Kit 20" / Clear

Standard Water Filter Housing Kit 20" / Clear

This double duty 20" water filter housing kit for whole homes will accomodate all 20" standard diameter cartridges or two 10" cartridges using a coupler. The sump on this whole house filter housing is clear. Kit comes complete with mounting hardware and filter wrench.

More About the Pentek S1-20 Pleated Sediment Filter 20 Micron - 20" Standard

The Pentek S1-20 pleated sediment water filter cartridge is used for removing suspended solids from water. The Pentek S1-20 is constructed of pleated cellulose that is bonded on the ends to thermoset plastisol. The sediment filter is given added strength by a polypropylene core. An outer plastic netting helps to maintain uniform pleat spacing under many flow conditions. The Pentek S1-20 pleated sediment filter is designed for use on chlorinated water supplies. It is rated for 20 micron and is an economical way to reduce sediment load in a water supply.