Reverse Osmosis Membrane - Filmtec 100 GPD
aQuatell Part Number
200914
Manufacturer Part Number
TW30-1812-100D
Reverse osmosis replacment membrane by Filmtec. This reverse osmosis membrane is intended for tap water and fits in virtuallly all standard residential reverse osmosis systems. 100 gallon per day.
Resources
Below is a list of downloadable resources for available in .pdf format.
In The Box
Everything that comes with this product.
- 1 X 100 GPD reverse osmosis membrane
Tech Specs
Everything you need to know about this product:
- Filmtec by Dow Corning
- 1.8" X 12"
- Single ended connector
- Intended for tap water
- Spiral Wound
More About the Reverse Osmosis Membrane - Filmtec 100 GPD
Dow manufacturers this Filmtec reverse osmosis membrane. This reverse osmosis membrane is intended for tap water applications and is ideally suited for residential and light industrial / commercial use. It is a spiral wound Thin Film Composite (TFC) membrane that must be used with non-chlorinated water supplies. It is very often used in residential reverse osmosis systems where the chlorine from the tap water is first removed with single or dual stage carbon pre filters.
Replacing the reverse osmosis membrane on a reverse osmosis system is an important step to maintaining high quality and quantity of water. In a residential setting, Filmtec membranes are usually replaced between 3 -5 years of service. A drop in the quantity of water being produced is a good indicator that it's time to change the reverse osmosis membrane. A drop in water quality (usually measured as an increase in conductivity or tds) is another indicator that the reverse osmosis membrane should be changed.
