Sanitron S14A UV System
aQuatell Part Number
200050
Manufacturer Part Number
S14A
Sanitron S14A is an ultraviolet water purifier that will filter up to 2 gallons per minute. It features a mechanical wiping mechanism and a view port to allow the user to confirm proper system performance.
Resources
Below is a list of downloadable resources for available in .pdf format.
In The Box
Everything that comes with this product.
- UV Chamber
- Power Supply
- Lamp
- Installation Manual
Tech Specs
Everything you need to know about this product:
- up to 2 gallons per minute
- 17" chamber length
- 1/2" NPT inlet/outlet
- Max pressure 100 psi
- 14 watts power consumption
- maximum iron = 0.3 ppm
- maximium manganese = 0.05 ppm
- pH range = 6.5 - 9.5
- maximum hardness = 6 gpg
- maximum turbidity = 5 NTU
- maximum susp. solids = 10 mg/L
Warranty
Coverage for this product includes the following:
- 1 year on all components
Common Accessories
You might want to consider adding the following to your order:
More About the Sanitron S14A UV System
The Sanitron S14A is an effective system for protecting a water supply from bacteria, cysts, and many other waterborne organisms. The Sanitron S14A will purify up to 2 gallons per minute making it a good point-of-use system. It can also be used effectively in many other industrial and commercial low-flow applications. The Sanitron S14A features many unique product features and benefits including a removable flanged head that allows the entire UV chamber to be opened in the event that inspection or repair is required. The Sanitron S14A also features a viewing port that allows the user to see if the UV lamp is functioning properly.
Other Features of the Sanitron S14A:
- Easy-Off Retainer Cap: Allows for easy lamp replacements. UV lamp can be changed without removing the quartz sleeve and without depressurizing the UV chamber. No tools are required for UV lamp change.
- Mechanical Wiper Mechanism: Dual-action wiper allows periodic cleaning of the quartz sleeve without interrupting the water flow. Complies with US Public Health Guidelines.
- Drain Plug: Allows in-place drainage of the UV system. Very handy for seasonally used systems.
Santitron S14A Facts:
- All Sanitron S14A systems must be used with a 5 micron prefilter. This prefilter prevents large particles that could harbor bacteria from passing through the UV system. aQuatell recommends a Pentek sediment filter.
- Water quality is important to consider. The peformance of all UV systems including the Sanitron S14A can be impacted by poor water quality.
- The lamp in the Sanitron S14A must be changed every year.
