Trojan UV Max (UVMax) Sleeve Bolt

Sleeve bolt for Trojan UV Max (UVMax) and PRO Systems

aQuatell Part Number
197627

Manufacturer Part Number
602665


The sleeve bolt holds the lamp (bulb) and sleeve together and also seals the lamp/sleeve combo to the steel UV chamber.

Resources

Below is a list of downloadable resources for available in .pdf format.

In The Box

Everything that comes with this product.

1 X Sleeve Bolt for any Trojan UV Max or PRO Model

More About the Trojan UV Max (UVMax) Sleeve Bolt

The Trojan 602665 sleeve bolt is an important component of a properly functioning Trojan UV Max (UVMax) & Trojan UV Max PRO ultraviolet (UV) light water filter. The sleeve bolt connects the quartz sleeve to the lamp and also acts to seal this lamp/sleeve to steel uv chamber.

Overtightening of the sleeve bolt may result in cracks, at which point the bolt should be replaced. If you notice any cracks in the sleeve bolt it is also a very good idea to inspect the lamp and quartz sleeve. Typically, if a sleeve bolt has been damaged by overtighening, the quartz sleeve will be damaged also.

Ultraviolet light water filters are a highly effective way to protect your water supply from bacteria, viruses, cysts, and many other organisms. Ultraviolet (UV) systems use a specialized UV lamp (bulb) that produces high quantities of damaging ultraviolet light. Any organisms passing by the light are destroyed. Ultraviolet systems do not add any dangerous chemicals to the water and are very easy to install and maintain.