Hallett 30 Ultraviolet Water System by UV Pure
Hallett 30 ultraviolet water system is an NSF Certified purification system that is ideal for public buildings, campgrounds, small municipal installations and other regulated water supplies.
In The Box
Everything that comes with this product.
- UV System
- 2 X Stainless Steel Flexible Connectors
- Solenoid Valve (auto shutoff valve)
- 1 Set of Lamps
Tech Specs
Everything you need to know about this product:
- Install Location: Point of Entry
- Flow Rate: 30 US Gallons per Minute
- Plumbing: 1" Female NPT (when connectors used)
- NSF Certifications NSF/ANSI 55 Class A
- Required Accessories: 5 Micron Pre-Filter
- Regular Maintenance: Annual Lamp Replacements
- Electrical Requirements: 110V Standard
- Physical Dimensions: 32 X 8" X 9""
More About the Hallett 30 Ultraviolet Water System by UV Pure
The Hallett 30 is an NSF Certified ultraviolet light water system that is suitable for small municipal and light industrial/commercial applications. The Hallett 30 incorporates the unique Crossfire technology where water passes inside of a quartz sleeve and two UV lamps in air - one on either side of the quartz sleeve - bathe the water in germicidal UV light killing bacteria, viruses, and cysts.
As with all UV Pure Ultraviolet Systems, the Hallett 30 is equipped with a self cleaning device which keeps the quartz sleeve clean even in very hard water conditions. You do not need to use a water softener with a UV Pure system. Two UV sensors monitor the amount of UV being delivered to the water in real time. These sensors are monitored by an onboard microprocessor. In the event that insufficient UV light is being delivered to the water, the microprocessor will close the included solenoid auto shut-off valve. This ensures that only treated, safe water is allowed to enter the drinking water system. An integrated data logger maintains a record of system performance. This information can be viewed on the LED display of the Hallett 30.
Hallett 30 Facts:
- must be used with a 5-micron prefilter
- can't be used on cloudy or stained water
- iron should be no greater than 3 ppm
- hardness should be less than 50 gpg
- manganese should be less than 0.5 ppm












