Harmsco 701-1/30 Polyester Premium 701 Series Filter Cartridge
aQuatell Part Number
201107131112
Manufacturer Part Number
701-1/30
The Harmsco 701-1/30 Polyester Premium 701 Series is a 30" long filter cartridge designed for 2-1/2" O.D. filter housings. It has a micron rating of 1, is made of 15 sq ft. of poly-pleated media, and is known for its high flow capability, lower pressure drops, and increased protection from bacteria and algae.
Resources
Below is a list of downloadable resources for available in .pdf format.
In The Box
Everything that comes with this product.
(1) Harmsco 701-1/30 Polyester Premium 701 Series Filter Cartridge
Tech Specs
Everything you need to know about this product:
- Size: 30" x 2-1/2"
- Micron rating: 1
- Media (sq ft): 15
- Recommended flow rate: 12 GPM
- Filter media: Polyester-Plus™, Synthetic and Polypropylene
- Center core: Rigid PVC with perforations or polypropylene
- Outer support media: Polypropylene
- Temperature: 140°F (60°C)
- Shrink wrap: Standard on all cartridges
- End caps: Pilable PVC, sealing surface built in
- Change out: 25 PSI ∆P (1.7 bar)
- pH: 3 to 11
Warranty
Coverage for this product includes the following:
Limited Warranty: Harmsco warrants their products to be free of material and workmanship defects. Determination of suitability of Harmsco products for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer.
The end user/installer/buyer shall be liable for the product’s performance and suitability regarding their specific intended applications. End users should perform their own tests to determine suitability for each application.
More About the Harmsco 701-1/30 Polyester Premium 701 Series Filter Cartridge
The Harmsco Premium 701 Series is a set of highly efficient filter cartridges that can be used for a variety of industrial applications. They are designed with pleated filter media have the largest surface area the industry has to offer, thus offering increased contaminant removal from your water supply, lower pressure drops, and high flow capabilities.
You can use the Harmsco Premium 701 Series for the following applications:
- Reverse osmosis pre-filtration
- Municipal drinking water filtration
- Chill water loop filtration
- Industrial water filtration
- Food & beverage filtration
What you're looking at is the Harmsco 701-1/30 Polyester Premium 701 Series Filter Cartridge, a 30" long filter cartridge with a nominal micron rating of 1. It is made of 15 sq ft. of poly-pleated media, and has a recommended flow rate of about 12 gallons per minute. Each case contains 28 pieces of Premium 701 filter cartridges, all of which are color coded to indicate their specific micron rating.
With the Harmsco 701-1/30 Polyester, you are using a filter cartridge that is designed for filter housings like the Harmsco® FSSS, BC, and HMC. It's cost-effective, efficient, and sturdy because of its longer filter runs, lower operating and maintenance costs, and that the end caps, center tubes, and media are thermally bonded as one component.
If you're after a reliable and functional 2-1/2" O.D. filter cartridge for your water filtration system, go for the Harmsco 701-1/30 Polyester Premium 701 Series Filter Cartridge.
