Harmsco HC/170-20HT High-Temperature Filter Cartridge
aQuatell Part Number
201108160522
Manufacturer Part Number
HC/170-20HT
The Harmsco HC/170-20HT High-Temperature Filter Cartridge is a premium high-temp filter cartridge used for aqueous and oil-based fluid applications. It has a nominal micron rating of 20, is made of 170 sq ft. of media, and has a recommended flow rate of 105 gallons per minute. It is designed for handle high flow rates, low pressure drops, and increase particle removal.
Resources
Below is a list of downloadable resources for available in .pdf format.
In The Box
Everything that comes with this product.
(1) Harmsco HC/170-20HT High-Temperature Filter Cartridge
Tech Specs
Everything you need to know about this product:
- Size: 30-3/4" 7-3/4" O.D.
- Micron rating: 20
- Filter media: 170 sq ft. polyester plus
- Recommended flow rate: 105 GPM
- End caps: Injection molded (HT)
- Temperature: Up to 200°F (93°C)
- Center core: Powder-coated perforated metal
- pH: 6.5 to 9.5
- Change out: 25 PSI ∆ P (1.7 bar)
- O-rings & sealing grommet: Buna N standard, optional Viton available
Warranty
Coverage for this product includes the following:
Limited Warranty: Harmsco warrants their products to be free of material and workmanship defects. Determination of suitability of Harmsco products for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer.
The end user/installer/buyer shall be liable for the product’s performance and suitability regarding their specific intended applications. End users should perform their own tests to determine suitability for each application.
More About the Harmsco HC/170-20HT High-Temperature Filter Cartridge
The Harmsco HC/170-20HT High-Temperature Filter Cartridge is a premium high-temp cartridge designed for Hurricane® and WaterBetter® filter housings. It has a nominal micron rating of 20, is made of 170 sq ft. of media, and has a recommended flow rate of 105 gallons per minute. It is a high-flow performing filter cartridge designed for a variety of water filtration applications.
Harmsco High-Temperature filter cartridges are designed for high capacity filtration at higher temperature levels than ordinary Harmsco filter cartridges. These high-temp cartridges come in two types of pleated media (polyester or cellulose phenolic) for flexibility and are made with longer filter runs to lessen the number of change outs and for increased particle removal.
With lesser change outs, you won't have to spend a fortune on maintenance costs any longer. You can also rest assured that your water filtration system lasts longer and are sturdy enough to accommodate high flow rates. Ensure top quality and affordable water filtration with the Harmsco HC/170-20HT High-Temperature Filter Cartridge.
Water Filtration Applications
The Harmsco HC/170-20HT High-Temperature Filter Cartridge can be used for several aqueous and oil-based fluid applications, including:
- Hot water loops
- Boiler make-up water
- Petrochemical
- Lubricating oil
- Cutting fluids
- Solvents
- Distillate fuel
- Fuel oil
- Hydraulic fuel
- Bio fuels
