Pentek C1-20 Carbon Impregnated Cellulose Filter

Pentek C1-20 filter cartridge

aQuatell Part Number
300128

Manufacturer Part Number
C1-20


Pentek C1-20 is an economically priced 5-micron sediment filter that is impregnated with powdered activated carbon.  It is ideal as a sediment filter where some taste/odor & chlorine reduction is desired.  Pentek C1-20 is recommended for use on chlorinated water supplies only.

Resources

Below is a list of downloadable resources for available in .pdf format.

In The Box

Everything that comes with this product.

  • 1 X Carbon Cellulose Water Filter

Tech Specs

Everything you need to know about this product:

  • 20" X 2 1/2"
  • 5 micron nominal rating
  • 1.0 psi pressure drop at 5 gpm
  • 5,00 gallon chlorine removal capacity at 2 gpm
  • PAC Impregnated Cellulose
  • Cellulose Polyester Reinforcement Backing
  • Buna-N Gaskets
  • 40˚F to 125˚F (4.4˚ C to 51.7˚C) temp rating

More About the Pentek C1-20 Carbon Impregnated Cellulose Filter

The Pentek C1-20 is a value-priced sediment filter that is used for sediment reduction and for removing small amounts of taste/odor and chlorine from the water.  The pleated design of the C1-20 offers a high surface area making this cartridge a good choice where high flow rates and low pressure drop are required.  The pleated design also gives the Pentek C1-20 good dirt holding capabilities.  Due to the cellulose construction of this filter it is only recommended for chlorinated water supplies.