Pentek ECP1-10 Sediment Filter 1-Micron - 10" Standard

aQuatell Part Number
300208

Manufacturer Part Number
ECP1-10


Pentek ECP1-10 is a 1-micron sediment filter featuring high flow capacity and low pressure loss at a very competitive price point.

Resources

Below is a list of downloadable resources for available in .pdf format.

In The Box

Everything that comes with this product.

1 X sediment filter cartridge

Tech Specs

Everything you need to know about this product:

  • 2 5/8" X 9 3/4"
  • less than 1 psi pressure loss at 10 gpm
  • cellolose & polyester construction
  • polypropylene core
  • vinyl plastisol end caps
  • 40˚F to 125˚F (4.4˚ C to 51.7˚C) temp rating

Common Accessories

You might want to consider adding the following to your order:

Whole House Water Filter Housing Kit 10" / Blue

Standard Water Filter Housing Kit 10" / Blue

This standard 10" water filter housing for whole homes will accomodate all standard sized water purfication cartridges. The sump on this whole house filter housing is blue. Kit comes complete with mounting hardware and filter wrench.

Whole House Water Filter Housing Kit 10" / Clear

Standard Water Filter Housing Kit 10" / Clear

This standard 10" water filter housing kit for whole homes will accomodate all standard sized water purfication cartridges. The sump on this whole house filter housing is clear. Kit comes complete with mounting hardware and filter wrench.

Pentek P1 Polyspun Sediment Filter 1 Micron

Pentek P1 Polyspun Sediment Filter 1 Micron - 10" Standard

Remove sediment with the Pentek P1 1-micron polyspun water filter cartridge. Reduces sand, silt, rust particles and scale particles. Resistant to chemicals and corrosion.

More About the Pentek ECP1-10 Sediment Filter 1-Micron - 10" Standard

The Pentek ECP1-10 is a 1-micron pleated cellulose/polyester sediment filter that is used for removing sediment from water.  The ECP1-10 offers an excellent combination of price and performance.  The pleated design maximizes surface area resulting in high flow rates and very low pressure drop.  The ECP1-10 also offers very good dirt holding capacity at this price point.  The combination of cellulose and polyester gives this filter good rigidity and bacterial resistance versus a cellulose only cartridge.

More about the Pentek ECP1-10 Cartridge:

The Pentek ECP1-10 cartridge is manufactured from a special formulation of resin-impregnated cellulose and polyester fibers.  The unique blend of these two materials provides a higher wet strength than regular cellulose cartridges. It also provides high flow rates and dirt- holding capacity, while maintaining extremely low pressure drop.  The filter media of the ECP1-10 is pleated around a polypropylene core for added strength and the ends are immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat block in this fashion fuses the components together forming a unified endcap and gasket.